Designed to mount on our NU, BTM & MCE Series motors. Available in aluminum and plastic materials with 6 different dimensions and pitches to cover your ventilation requirements. Available from 6” (154mm) to 12” (300mm) diameter, with standard stock pitch of 22°, 28°, 34° and available in 19°, 25°, 31°, both suction (pull air over the motor) or blowing (push). The plastic blade profile was carefully designed to reduce airflow noise and is recommended for sensitive applications. Its outstanding flexibility assures dimensional stability and prevents unbalanced blade vibrations after transport and handling.

Elco’s shrouds are designed to optimize fan blade position inside the orifice and improve fan motor airflow performance. Available for fan blades from 6” (154mm) to 12” (300mm), available in coated sheet metal or in molded plastic up to 10” (254mm), with reduced vibration and naturally rust-proofed. Our rings replace the motor bracket and represent a cost effective mounting solution on most evaporative coil applications. Widely used in display cases, food and beverage coolers and freezers. Mounts on all the NU, BTM and MCE series motor range.

Mainly used on condensing units or wherever protection from the fan blade on the motor side is needed. Available for fan blades from 6” (154mm) to 12” (300mm) in galvanized steel wire. 8” (200mm), 9" (230mm) and 10” (254mm) also come in a molded plastic that reduces vibrations and is naturally rust-proof. Guards replace the motor bracket and mount on all the NU, BTM and MCE series motor range.